WARP Connection is Very Slow

windows 11, warp tunnel speed is too slow, and often lost connection to “Colocation Center” or “DNS Connectivity” now and then.

The automatically connected Colocation Center is HKG(583f49), can I skip this on in any configuration manually? how?

The below is the output from Windows Powrshell

warp-cli.exe tunnel stats
Endpoints: 0.0.0.0, 2606:4700:100::a29f:c108
Time since last handshake: 112s
Sent: 52.0MB; Received: 41.2MB
Estimated latency: 244ms
Estimated loss: 57.85%;

TRACERT.EXE 2606:4700:100::a29f:c108

通过最多 30 个跃点跟踪到 2606:4700:100::a29f:c108 的路由

1 <1 毫秒 <1 毫秒 <1 毫秒 2409:8a00:79a3:5260:16d8:64ff:fe28:f16e
2 3 ms 3 ms 3 ms 2409:8000:0:2114::1
3 4 ms 4 ms 4 ms 2409:8000:0:2115::
4 5 ms 5 ms 9 ms 2409:8080:0:2:106:175::
5 38 ms 38 ms 38 ms 2409:8080:0:1:106:305:0:1
6 44 ms 44 ms 44 ms 2409:8080:0:1:305:3c3:0:1
7 46 ms 46 ms 46 ms 2409:8080:0:1:3c3:3f3:0:1
8 45 ms 45 ms 45 ms 2409:8080:0:4:3f3:394:0:1
9 46 ms 46 ms 45 ms 2402:4f00:100::991
10 49 ms 48 ms 50 ms 2402:4f00:100::706
11 * * * 请求超时。
12 * 241 ms * 2400:cb00:581:3::
13 * 241 ms * 2606:4700:100::a29f:c108
14 241 ms 241 ms 241 ms 2606:4700:100::a29f:c108


Due to the packet lost, the speed test is poor